smokeping安装部署最佳实践 – 徐亮偉架构师之路~

1.1安装smokeping

[root@linux-node2 ~]# cat /etc/redhat-release #查看服务器信息

CentOS release 6.7 (Final)

[root@linux-node2 ~]# uname -r

2.6.32-573.el6.x86_64

[root@linux-node2 ~]# yum -y install perl perl-Net-Telnet perl-Net-DNS perl-LDAP perl-libwww-perl perl-RadiusPerl perl-IO-Socket-SSL perl-Socket6 perl-CGI-SpeedyCGI perl-FCGI perl-CGI-SpeedCGI perl-Time-HiRes perl-ExtUtils-MakeMaker perl-RRD-Simple rrdtool rrdtool-perl curl fping echoping httpd httpd-devel gcc make wget libxml2-devel libpng-devel glib pango pango-devel freetype freetype-devel fontconfig cairo cairo-devel libart_lgpl libart_lgpl-devel mod_fastcgi screen #通过yum安装所依赖的库以及环境

[root@linux-node2 ~]# cd /usr/local/src/ #进入默认源码包存放路径

[root@linux-node2 ~]# wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.9.tar.gz #下载smokeping包

[root@linux-node2 src]# tar xf smokeping-2.6.9.tar.gz #解压smokeping

[root@linux-node2 src]# cd smokeping-2.6.9 #进入smokeping目录

[root@linux-node2 smokeping-2.6.9]# ./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty #

[root@linux-node2 smokeping-2.6.9]# ./configure –prefix=/usr/local/smokeping #编译smokeping到/usr/local

[root@linux-node2 smokeping-2.6.9]# cd /usr/local/smokeping/ #进入smokeping目录

[root@linux-node2 smokeping]# mkdir cache data var #创建三个目录

[root@linux-node2 smokeping]# touch /var/log/smokeping.log #创建smokeping日志文件

[root@linux-node2 smokeping]# chown apache.apache cache/ data/ var/ /var/log/smokeping.log #授权属主属组为apache

[root@linux-node2 smokeping]# cd /usr/local/smokeping/htdocs/ #进入smokeping下htdocs目录

[root@linux-node2 htdocs]# mv smokeping.fcgi.dist smokeping.fcgi #修改smokeping文件名

[root@linux-node2 smokeping]# mv /usr/local/smokeping/etc/config.dist /usr/local/smokeping/etc/config #修改smokeping下etc目录smokeping

1.2修改smokeping配置文件

[root@linux-node2 smokeping]# sed -i ‘s#cgiurl = http://some.url/smokeping.cgi#cgiurl =
http://10.0.0.8/smokeping.cgi#g’ /usr/local/smokeping/etc/config

[root@linux-node2 smokeping]# sed -i ‘s#300#60#g’ /usr/local/smokeping/etc/config #默认检测时间300秒修改60秒

[root@linux-node2 smokeping]# sed -i ‘s#20#60#g’ /usr/local/smokeping/etc/config
#默认ping20次，修改为60秒ping60次

[root@linux-node2 ~]# vim /usr/local/smokeping/etc/config #在presentation添加utf-8中文字符集

*** Presentation ***

charset = utf-8

[root@linux-node2 smokeping]# chmod 600 /usr/local/smokeping/etc/smokeping_secrets.dist #修改密码权限为root只读

1.3修改apache配置文件

[root@linux-node2 htdocs]# htpasswd -c /usr/local/smokeping/htdocs/htpasswd darker #设置登录密码认证通过apache自带验证功能

New password:

Re-type new password:

Adding password for user darker

DocumentRoot “/var/www/html” #在这行下面添加如下—标红的代表密码验证

Alias /cache “/usr/local/smokeping/cache/”

Alias /cropper “/usr/local/smokeping/htdocs/cropper/”

Alias /smokeping “/usr/local/smokeping/htdocs/smokeping.fcgi”

AllowOverride None

Options All

AddHandler cgi-script .fcgi .cgi

Order allow,deny

Allow from all

AuthName “Smokeping”

AuthType Basic

AuthUserFile /usr/local/smokeping/htdocs/htpasswd

Require valid-user

DirectoryIndex
smokeping.fcgi
</Directory>

1.4设置smokeping启动脚本

[root@linux-node2 ~]# cat /etc/init.d/smokeping #smokeping启动脚本

#!/bin/bash

# chkconfig: 2345 80 05

# Description: Smokeping init.d script

# Write by : linux-Leon_xiedi

# Get function from functions library

. /etc/init.d/functions

# Start the service Smokeping

function start() {

echo -n “Starting Smokeping: “

/usr/local/smokeping/bin/smokeping >/dev/null 2>&1

### Create the lock file ###

touch /var/lock/subsys/smokeping

success $”Smokeping startup”

echo

}

# Restart the service Smokeping

function stop() {

echo -n “Stopping Smokeping: “

kill -9 `ps ax |grep “/usr/local/smokeping/bin/smokeping” |
grep -v grep | awk ‘{ print $1 }’` >/dev/null 2>&1

### Now, delete the lock file ###

rm -f /var/lock/subsys/smokeping

success $”Smokeping shutdown”

echo

}

#Show status about Smokeping

function status() {

NUM=”`ps -ef|grep smokeping|grep -v grep|wc -l`”

if [ “$NUM” == “0” ];then

echo “Smokeping is not run”

else

echo “Smokeping is running”

}

### main logic ###

case “$1” in

start)

start

;;

stop)

stop

;;

status)

status

;;

restart|reload)

stop

start

;;

echo $”Usage: $0
{start|stop|restart|reload|status}”

exit 1

esac

exit 0

1.5启动服务以及访问smokeping

[root@linux-node2 ~]# chmod 755 /etc/init.d/smokeping #添加脚本755权限

[root@linux-node2 ~]# chkconfig –add smokeping #将smokeping加入开机启动

[root@linux-node2 ~]# chkconfig smokeping on #设置smokeping为开机启动

[root@linux-node2 ~]# chkconfig httpd on #设置apache为开机启动

[root@linux-node2 ~]# /etc/init.d/httpd restart #重启apache服务

[root@linux-node2 ~]# /etc/init.d/smokeping restart #重启smokeping服务

1.通过浏览器访问smokeping，如图1-1

图1-1

1.6添加需要监控的网站和节点

注意事项：

1）在/usr/local/smokeping/etc/config中添加

2）smokeping就这点不好，添加节点不能在前台Web页面添加，一定要在后台的配置文件中添加。

3）修改/usr/local/smokeping/etc/config 后，必须重启smokeping 程序，配置才会生效

4）smokeping 会根据配置文件config
在/usr/local/smokeping/data 之下添加moniter文件夹，其下包含website子文件夹

5）用vmware
workstation的虚拟机测试有一点好处，workstation下的虚拟网卡可以设置出入的丢包率，适合smokeping做丢包测试, 经过测试smokeping检测出的丢包率与vmware worksation虚拟网卡设置的丢包率基本相同,也就是说smokeping 能够反应网络的真实状况。

添加监控节点示例：注意+是第一层，++是第二层，+++ 是第三层

+ Other

menu = 三大网络监控

title = 监控统计

++ dianxin

menu = 电信网络监控

title = 电信网络监控列表

host = /Other/dianxin/dianxin-bj
/Other/dianxin/dianxin-hlj /Other/dianxin/dianxin-tj /Other/dianxin/dianxin-sc /Other/dianxin/dianxin-sh
/Other/dianxin/dianxin-gz

+++ dianxin-bj

menu = 北京电信

title = 北京电信

alerts = someloss

host = 202.96.199.133

+++ dianxin-hlj

menu = 黑龙江电信

title = 黑龙江电信

alerts = someloss

host = 219.147.198.242

+++ dianxin-tj

menu = 天津电信

title = 天津电信

alerts = someloss

host = 219.150.32.132

+++ dianxin-sc

menu = 四川电信

title = 四川电信

alerts = someloss

host = 61.139.2.69

+++ dianxin-sh

menu = 上海电信

title = 上海电信

alerts = someloss

host = 116.228.111.118

+++ dianxin-gz

menu = 广东电信

title = 广东电信

alerts = someloss

host = 113.111.211.22

++ liantong

menu = 联通网络监控

title = 联通网络监控列表

host = /Other/liantong/liantong-bj /Other/liantong/liantong-hlj
/Other/liantong/liantong-tj
/Other/liantong/liantong-sc
/Other/liantong/liantong-sh /Other/liantong/liantong-gz

+++ liantong-bj

menu = 北京联通

title = 北京联通

alerts = someloss

host = 61.135.169.121

+++ liantong-hlj

menu = 黑龙江联通

title = 黑龙江联通

alerts = someloss

host = 202.97.224.69

+++ liantong-tj

menu = 天津联通

title = 天津联通

alerts = someloss

host = 202.99.96.68

+++ liantong-sc

menu = 四川联通

title = 四川联通

alerts = someloss

host = 119.6.6.6

+++ liantong-sh

menu = 上海联通

title = 上海联通

alerts = someloss

host = 210.22.84.3

+++ liantong-gz

menu = 广东联通

title = 广东联通

alerts = someloss

host = 221.5.88.88

++ yidong

menu = 移动网络监控

title = 移动网络监控列表

host = /Other/yidong/yidong-bj
/Other/yidong/yidong-hlj /Other/yidong/yidong-tj /Other/yidong/yidong-sc /Other/yidong/yidong-sh
/Other/yidong/yidong-gz

+++ yidong-bj

menu = 北京移动

title = 北京移动

alerts = someloss

host = 221.130.33.52

+++ yidong-hlj

menu = 黑龙江移动

title = 黑龙江移动

alerts = someloss

host = 211.137.241.35

+++ yidong-tj

menu = 天津移动

title = 天津移动

alerts = someloss

host = 211.137.160.5

+++ yidong-sc

menu = 四川移动

title = 四川移动

alerts = someloss

host = 218.201.4.3

+++ yidong-sh

menu = 上海移动

title = 上海移动

alerts = someloss

host = 117.131.19.23

+++ yidong-gz

menu = 广东移动

title = 广东移动

alerts = someloss

host = 211.136.192.6

中青看点发表在如何系统学习python2017年12月15日
这样精彩的博客越来越少咯！
python发表在Cobbler自动化部署最佳实践2017年9月12日
对不起，穷匕一个，没钱打赏你！非常感谢你…
快速建立个人知识体系 - python修行路发表在新手提问必备-如何有效的提问？2017年6月23日
[…] 第一时间在各大QQ群…
个人知识体系的重要性 - 徐亮偉架构师之路~发表在新手提问必备-如何有效的提问？2017年6月20日
[…] 之前写过一篇新人如何…
karry发表在云计算与虚拟化之KVM企业实战2017年6月19日
博主好流弊，赞一个

Tim

8年前
2016-6-06 7:39:01

伟哥威武~留脚印
寒冰

8年前
2016-6-16 13:11:49

师兄好厉害
sdfa

寒冰

8年前
2016-8-11 17:37:56

good ,it is good ,very very good
646493737

8年前
2017-1-16 15:49:33

[root@linux-node2 smokeping-2.6.9]#

1.1安装smokeping

1.2修改smokeping配置文件

1.3修改apache配置文件

1.4设置smokeping启动脚本

1.5启动服务以及访问smokeping

1.6添加需要监控的网站和节点

评论

发送评论编辑评论

1.1安装smokeping

1.2修改smokeping配置文件

1.3修改apache配置文件

1.4设置smokeping启动脚本

1.5启动服务以及访问smokeping

1.6添加需要监控的网站和节点

评论

发送评论 编辑评论

发送评论编辑评论